(OF-KA) TUANA -KB 56 SPECIAL

portfolio image portfolio image portfolio image

(OF-KA) TUANA -KB 56 SPECIAL

Edge Banding Machine

(OF-KA) TUANA -KB 56 SPECIAL

  • Edge Banding Machine //
TECHNICAL PROPERTIES
Nominal Current 380-400 V ACP -50-60 hz
Noise Level 82.9 db.
Edge Material Thickness 0.40 mm-3 mm
Board Thickness 8-65 mm
Min. Width Of Work Piece 100 mm
Working Height 12 m/dk - 20 m/dk
Max. Boiler Copacity 950 mm
Max. Boiler Copacity 3.5 kg
Air Pressure 6-8 atm
Front Milling Saw Diameter Ø 70 mm
Trammer Saw Diameter Ø 100x3.2 mm
Slanting Trimming Saw Diameter Ø 49 x r3 mm
Trimming Saw Diameter Ø 69 x r3 mm
Grooving Milling Saw Diameter Ø 80mm - 8,5mm
Radyus Distance 36 mm
Front Milling Motors Power And R.P.M. 1,5 kw 12000d/dk
Trimmer Motors Power And R.P.M. 0,55 kw 12000d/dk
Slanting Trimming Motors Power And R.P.M. 0,75 kw 12000d/dk
Trimming Motors Power And R.P.M. 0,55 kw 12000d/dk
Grooving Milling Motor Power And R.P.M. 2,6 kw 12000d/dk
Buffing Motors Power And R.P.M. 0,25 kw 3000d/dk
Hot Blow Electirity Consumption 3 kw 1 clock
Pallet And Chain Motors Power And R.P.M. 3 kw 1400d/dk
Total voltage 13 kw
Lenght Machine 6200 mm
Width Machine 800 mm
Height Machine 1600 mm
Net Weight Machine 2000 kg

 

Any questions about the product, 24/7 can pass.
SEND
SEND

Mechanical Units

team member

Jumping Pre- milling Unit 

Cleans up possible cracks and crusts on the surfaca for more efficiency  and better looking before banding process. Auto adjustable 0.40-20.00 mm.

team member

Upper Freeding Glue Unit and Press

Glues 0.40-0.30 mm thickness for PVC, paper, melamine Glue warming-up time10-15 minutes Independent glue roll lets other units operating seperately.Glue band width 8-65 mm.

team member

New First- End Cutting Unit 

Without damaging the piece ,unit makes the pre-cutting process with angle adjustment option. re-feeding lenght is 500 mm. for the next piece.

team member

Servo Control Dish Guided Auto Matic Up- Down Milling
 
Reduces time setting time multi-point time settings.jumps automatically from 0.40 mm to 2.00 mm processinglenght is 500 mm. fot the next piece.

team member

Rounding Unit 

Copy milling features allows rounding unit making postforming softforming and works for straight corners

team member

Cleaning Liquid Brushing Unit 

This group helps for cleaning and removing the contrasts happens  due to the operations made over the surface.

team member

Hot  Air Blow

Units particularly in dark parts, milling and engraving form arising from the dull and the whitening of the transformation of the former provides the color.

team member

Channel Drawer With Jumping System

Draws channel from the point selected over the up to 10 mm depth . Jumping on and off options.